VOP40 is a compact probing system that thanks to the optical transmission allows the part to be measured, positioned and aligned in small and mid sized work centres and milling machines and in general all machines with a limited work area.

VOP40 is a compact optical system that can be used to inspect the part rapidly during the machining process and check that it is aligned correctly. This means that it is possible to eliminate manual setting errors, as well as any incorrectly entered data, thereby reducing machining time and improving production quality.

The system uses modular optical technology, which has been optimised in order to ensure the maximum immunity to interference from any light sources that may be present in the working area, in order to guarantee efficient and reliable performance.

In addition to ensuring secure optical transmission, the system can also be used to handle up to four MIDA probes in sequential mode, using a single VOI interface.

Furthermore, the VOP40 system represents the ideal solution for dual turret applications, thanks to the use of multi-channel optical technology, which means that it is possible to manage two VOP40 probes simultaneously and independently

The compact VOP40 probe works paired with the VOI, receiver with built-in interface and is backward compatible with previously installed optical transmission systems.

Marposs supplies specific measurement software packages for the most widely used CNCs, to ensure that VOP40 can be used for retrofit applications on existing machines.

Siemens Simultaneous recording (realtime simulation of the curr. machining) (P22)

Software

Siemens Simultaneous recording (realtime simulation of the curr. machining) (P22)

Software